YTONG block – The ideal solution for modern buildings.
This block is a standard product which is produced in various sizes, formats and bulk densities. The outstanding thermal insulation by air trapped in millions of pores is a characteristic feature. The requirements are easily met with a thermal insulation value of up to lamda (λ) 0.09 W/(mK). Other properties of this material include the high load-bearing capacity of solid blocks with a robust supporting frame to bear loads from all sides, as well as outstanding protection against fire. YTONG blocks can be used for fire walls. Pockets cut into the block allow these blocks to be laid ergonomically, as well as quickly and easily on a thin mortar bed thanks to large formats with tongue and groove. Blocks can easily be cut to the required size with a saw. YTONG aerated concrete is made from natural raw materials – sand, lime, cement, water and a small amount of sponging agent (powdered aluminium).
YTONG U-Form Blocks.
YTONG U-Form Blocks are formwork blocks for efficient production of concrete joists, lintels and stiffeners, etc. Additional local support is only necessary when spanning openings more than 1.25 m wide.
YTONG lintels are available to span openings in load-bearing and non-load-bearing walls. The YTONG Lintel (load-bearing) is characterised by its high load-bearing capacity. There is no need to change materials when finishing the surface, since the same plaster base is involved. The YTONG Lintel (non-load-bearing) is used in non-load-bearing walls.